6
Video Inputs
The iScan VP30 has eleven (11) video inputs and an optional SD-SDI input available (P/N SDI-601A).
The inputs and the formats they support are as follows:
•
Video 1 (NTSC, PAL, PAL-M and SECAM)
•
Video 2 (NTSC, PAL, PAL-M and SECAM)
•
S-Video 1 (NTSC, PAL, PAL-M and SECAM)
•
S-Video 2 (NTSC, PAL, PAL-M and SECAM)
•
Component/RGBS 1 (480i/p, 576i/p, 720p@50Hz, 720p@60Hz, 1080i@50Hz, 1080i@60Hz)
•
Component/RGBS 2 (480i/p, 576i/p, 720p@50Hz, 720p@60Hz, 1080i@50Hz, 1080i@60Hz)
•
RGBHV/Component (480p, 576p, 720p@50Hz, 720p@60Hz, 1080i@50Hz, 1080i@60Hz,
VGA/SVGA/XGA/SXGA@60Hz)
•
HDMI 1 (480i/p, 576i/p, 720p@50Hz, 720p@60Hz, 1080i@50Hz, 1080i@60Hz,
VGA/SVGA/XGA/SXGA@60Hz RGB/YCbCr 4:4:4/ YCbCr 4:2:2)
•
HDMI 2 (480i/p, 576i/p, 720p@50Hz, 720p@60Hz, 1080i@50Hz, 1080i@60Hz,
VGA/SVGA/XGA/SXGA@60Hz RGB/YCbCr 4:4:4/ YCbCr 4:2:2)
•
HDMI 3 (480i/p, 576i/p, 720p@50Hz, 720p@60Hz, 1080i@50Hz, 1080i@60Hz,
VGA/SVGA/XGA/SXGA@60Hz RGB/YCbCr 4:4:4/ YCbCr 4:2:2)
•
HDMI 4 (480i/p, 576i/p, 720p@50Hz, 720p@60Hz, 1080i@50Hz, 1080i@60Hz,
VGA/SVGA/XGA/SXGA@60Hz RGB/YCbCr 4:4:4/ YCbCr 4:2:2)
•
SD-SDI (480i/576i – SMPTE 259M-Compliant)
NOTE:
The iScan VP30 is able to process HDCP protected signals. However, the output signal may
be only visible if a valid HdCp supported display is hooked up to the Vp30’s HdMi output connector.
The output signal would never be visible through the Vp30’s analog bnC output connectors.
Video Outputs
The iScan VP30 has two video outputs, one analog and one digital. The analog output on the iScan
VP30 can output the following signal types:
•
YPbPr (Component)
•
rGbHV
•
rGsb
•
rGbs
The digital output on the iScan VP30 can output either:
•
RGB 4:4:4 (8-bit)
•
YCbCr 4:2:2 (10-bit)
•
YCbCr 4:4:4 (8-bit)
To connect the iScan VP30 to a display that has a DVI input, use either an HDMI-to-DVI cable or an
adapter.
Audio Inputs
There are nine (9) audio inputs on the iScan VP30:
•
Two (2) Optical Digital inputs
•
Two (2) Coaxial Digital inputs
•
One (1) Analog (L/R) input
•
Four (4) HDMI inputs
