Absima CR7P, Manual

Page: 53 / 92

19
6.26 System Settings - Stick Calibration
The CALIBRATION(stick calibration) function is used to restore the data of the neutral position
and endpoints , which are changed for certain reasons after the transmitter has been used for a
long time. The ST, TH and VR2 channels can be recovered by using this function please refer to the
chapter for stick calibration.
Function settings:
1. In the CALIBRATION menu, turn the steering wheel left and right to the maximum and return it
to the neutral position; pull the trigger back and forth and return it to the neutral position; then
turn VR2 left and right to the maximum and return it to the neutral position; and finally press
the OK key to confirm the calibration.
2. Carry out a test to confirm that all channel outputs set after calibration are functioning as
expected.
6.27 System Settings - Firmware Update
Function settings:
In the SYSTEM SET menu, select the item to be set by pressing the UP/DOWN key and press the OK
key for editing. Set the desired value by pressing the UP/DOWN key and press the OK key to confirm
the adjustment .
The FW UPDATE(firmware update) function is used for synchronizing the system to the latest version
and experiencing better functions and services when the firmware is upgraded by the manufacturer.
Function settings:
Note: This function is only available in the Absima Assistant software provided by Absima.
1. In the FW UPDATE menu, a dialog box will pop up. At this time, you can select YES by pressing
the UP/DOWN key and press the OK key to s tar t the update session. The current menu will be
closed directly once the update session is completed.
2. Carry out a test to confirm that the transmitter functions normally after the update.
Note: Always ensure sufficient power supply for the transmitter when using this function.