15
Function settings:
1.
In the RX SET(receiver setting ) menu, select the FAILSAFE by pressing the UP/DOWN key. Press
the OK key to enter the function setting.
2.
Select the item you need to adjust by pressing the UP/DOWN key. Press the OK key to enter the
edit state. Then adjust it by pressing the UP/DOWN. Press return after adjustment .
3.
Test the function by powering off the transmitter to confirm that all channel outputs operate
normally as expected.
6.18 Receiver Settings - Bind Settings:
The transmitter and the receiver have been bound with each other before delivery and can be
operated directly. If you want to replace the receiver, you need to bind the new receiver with the
transmitter by using the binding function before they can be operated normally.
Four parameters - RF type, receiving type, output mode, response speed - and a BIND key are
provided for setting purpose.
RF type: There are two options available, ANT1WAY one-way and ANT2WAY two-way. If you are using
a two-way receiver, it is recommended to select ANT2WAY two-way, which may bring you a better
experience with more information feedback .
ANT1WAY means a one-way mode. In this mode, only the transmitter gives commands to the
receiver; while the receiver outputs and performs commands received from the transmitter. The
advantage is that it can ensure simultaneous operation by more users on the same site with less
interference.
ANT2WAY means a two-way mode, which enables intercommunication between the transmitter and
the receiver to be configured with the corresponding functions , so that the basic information of
the model can be provided to the user in real time. For example, if you want to know the battery
voltage of the model vehicle, you can enable this option and bind the receiver configured with this
function, then you can read the battery voltage value on the transmitter.
Receiver type: Two options are available, namely standard receiver and two-in-one receiver, which
can be selected according to the receiver you are using. The option of two-in-one receiver means
a receiver configured with a ESC; however, standard receivers are supplied by default . For details ,
please visit our website to learn more about relevant models .
Output mode: There are four optional output modes (combination of two output modes), i.e., PWM/
SBUS, PPM/IBUS, PWM/IBUS, PPM/SBUS four output modes , which can be selected according to
actual needs .
Servo frequency: There are three optional output modes , i.e., analog , digital and others , which
can be selected according to the type of servo. The digit following each option is used to set the
frequency of the servo output .
Note: The frequency of analog servos , digital servos and other servos are 60HZ , 380HZ and 50HZ-
400HZ respectively.
Function settings:
1.
In the BIND SET menu, select the item to be adjusted by pressing the UP/DOWN key and press
the OK key for editing. Set the desired value by pressing the UP/DOWN key and press the OK key
to confirm the adjustment .
2.
After the adjustment and setting are completed, select START by pressing the UP/DOWN key and
Summary of Contents for CR7P
