KL II
Series User Manual 16
fault phenomenon.
8. Module protection: During the installation of the LED module, the corners of the module should be
protected to avoid collisions causing the lights to fall off. Wear dust-free gloves during installation to avoid
staining the surface of the module with sweat or dust on your hands.
9. Display protection: In the process of installation and construction, a dust collector must be used to reduce
the concentration of dust. After construction, a clean canvas must be used to cover the lamp surface of the
large screen to prevent dust and corrosive gas from attacking the lamp beads.
4
PRODUCT INSTALLATION
Product installation type:
NO.
Installation type
remark
1
Ground stack installation
Install the LED cabinets on the steel structure with the
connecting plate
2
Wall-mounted installation
Use sub frames to install on the wall
3
Rigging installation
Use hanging beams to install on the air frame or truss
4.1 Ground stack installation
KL II series ground stack installation accessories are as follows
：
No.
Name
Picture
Function
1
connecting plate
Used to fix the LED cabinet to the
steel structure
2
M8x10mm bolt
Used to fix the LED cabinet to the
steel structure
3
M6x30mm bolt
Connect and fix the cabinets
between top and bottom and left
and right
Front installation：
Step 1:
Take out the KL II cabinet frame from the package
and install the first layer at the bottom
Note: install from the middle to both sides
