Absco Industries
Assembly Instruction Manual
ABSCO REGENT SHED
MODEL: 30292RK
3.00mW x 2.96mD x 2.10mH
Model: 30292RK
20/09/18
1.1
18
DOOR PANEL ASSEMBLY
Nuts and bolts may be used instead of pop rivets by
drilling out hinge holes using a 4mm drill bit. Both
are supplied.
The two holes required to connect the padbolt hasp for each door have not been pre-punched, to
allow for proper alignment, position each hasp centrally over the padbolt shaft and drill 3mm holes and
secure with screws.
91A
91A
A
B
