STEP 2.
JA-2
JA-1
ALSO FASTEN THE BOTTOM
OVERLAP SECTIONS OF THE
EDGE BEAMS WITH THREE TEK SCREWS.
SECURE THE EDGE BEAMS TOGETHER AT EACH CORNER USING THE JOINER
ANGLES AS SHOWN.
THE JOINER ANGLES SHOULD BE POSITIONED ON THE INSIDE OF THE EDGE BEAMS, HELD WITH
'G' CLAMPS, AND FASTENED WITH TEK SCREWS FROM THE OUTSIDE OF THE EDGE BEAMS.
SEAL ALL JOINTS WITH SILICONE.
THE EXTERNAL DIMENSIONS OF THIS FRAME SHOULD MATCH THE CONCRETE SLAB SIZE OF
5500 x 5500 WITH A DIAGONAL MEASUREMENT OF 7778, AS SHOWN ON THE FRONT PAGE OF
THIS INSTRUCTION.
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION MANUAL
CARPORT MODEL: CPDW50
10-05-2017
Absco Industries
Skillion Carport Model: CPDW50
PAGE 08
