Absco Industries
Assembly Instruction Manual
ABSCO COMPACT GARAGE
MODEL: CG34552N2
3.4m W x 5.5m D x 2.17m H
Model: CG34552N2
29/09/19
23
Fit Wall Sheets
Corner Sheets
Secure the four corner sheets in place as shown.
• Position each sheet flush with the top of the frame, with the bottom end overlapping the concrete slab by 30mm to
form a weather tight seal.
• Each sheet is 773mm wide, with a sheet to sheet coverage of 740mm. As coverage of each sheet can vary slightly,
it is important to monitor your progress. You can stretch or shrink the sheet coverage as you place each sheet to
accomplish this.
• As you progress, multiply the number of sheets remaining by 740mm, which should be the same as the distance left,
to the center of the outside rib of each fixed sheet.
• Use a spirit level to ensure the sheets are vertical.
• Use tek screws in every second pan, fastening sheets to top and bottom girts and edge roof purlins. Fasten sheets to
all frame uprights at 300mm centers.
Overlap the first wall
sheet only by one pan.
7 sheets per side.
Secure 077-1 centrally to the front
gable
Secure 077-2, 077-3 sheets as
shown
Overlap 077-4, 077-5 sheets by
three pans which will then overlap
the corner sheets.
226L
226L
CRA-2
CLA-2
218
077-1
077-2
077-3
077-5
077-4
