Page 1 of 2
Rev. A
PahaQue Wilderness, Inc
T@DA Trailer Tent
SETUP INSTRUCTIONS
Thank you for purchasing the T@DA Trailer Tent, another quality product Made in the USA by
PahaQue Custom Shop. This product is backed by our Lifetime Warranty against any and all defects
in materials and workmanship, while our fabric carries a 3 year warranty against UV and other
damage. When used and cared for properly, this product will provide many years of reliable service.
A FEW QUICK NOTES:
SET-UP
----Your Tent can be easily set-up in 10 minutes or less by one or two people, if you
follow the basic sequence detailed below. If time allows, we would recommend that you read
through these instructions in their entirety and do a practice set-up at home before heading into
the wilderness. Then you can be sure all components are present & functional, and proceed
through the set-up sequence at a leisurely pace to learn the most efficient techniques.
TAKE DOWN
--- For the take down, simply reverse the set-up sequence.
LONG TERM STORAGE
--- Your T@DA Trailer Tent is more likely to be damaged by mold,
mildew or bacteria during storage than by elements while set up and in use. Make sure that all
food or other organic material is removed, and that your tent is thoroughly dry before packing
into the stuff bag. If you have to pack up and leave the campsite while your tent is damp, set it up
later at home & allow it to dry thoroughly for long-term storage.
How to install your
T@DA Trailer Tent
by PahaQue
1.
Locate
the following parts included with your T@DA Trailer Tent:
Tent
Trailer Skirt
One fiberglass pole
One Aluminum roof pole
Ground stakes - 10
2.
Locate
the trailer skirt. Starting at the ends of the bottom keder rail closest to the
trailer door, insert the right half, and then the left (rear) half of the skirt into the
position. See Photo A
