Absco Industries
Assembly Instruction Manual
ABSCO COMPACT GARAGE
MODEL: CG34552N2
3.4m W x 5.5m D x 2.17m H
Model: CG34552N2
29/09/19
26
Fitting Trim / Flashing
Barge Flashing
4x Barge flashing (TR34) - 3030mm Long.
Trim to required length.
Fit to the front and rear gables fixing through the
roof at purlin locations.
Fix to gutter stop ends at both sides.
Ridge Capping
2x Ridge Capping (TR08) - 3030mm Long.
Working from the garage towards the center,
lay the ridge capping on the ridge of the roof
sheets, overlapping sections to suit the length.
Secure to every second rib of the roof sheeting
with screws and neo washers.
Note: Avoid walking on the roof so the sheeting
does not get damaged. If it is necessary, walk
only on the sheet pans at ridge purlin locations,
after all sheets have been fully fastened to the
framework. To further avoid damage or injury,
wear a safety harness and move along the ridge
on your hands and knees.
Door Trim
1x Fit door flashing (TR21) - 3030mm Long.
Trim to required length.
Fit between the front wall gable sheeting and the
header beam.
Fix with hex head tek screws.