ABS Provides, Operating Instructions Manual, Page: 14 / 32

EN
14
7.2.2 Water Side
Water side of condensers can vary from 1 up to 4 passes, on tube bundle condensers, while “n” circuits in the
case of compact condensers. The headers can be in cast or iron or carbon steel.
On 1 Pass models the inlet connection is placed on one header and the outlet is on the opposite header.
The water inlet is located on the opposite side compared to refrigerant inlet (that is on the same side as the
refrigerant outlet).
On 2 and 4 Passes models, inlet and outlet connections are both on the same header with the inlet placed in
the lower side.
The following is the layout of the water connections.
1P 2P 4P
FR
ONT
SIDE
REARSIDE
7. Installation