6
Installation and Operating Instructions
ABS submersible sewage pump AFP 0831S and 0841S
Legend
1002-00
Model
Pump type/ Item No.
SN
Serial No.
UN
Rated Voltage
P2
Rated Output Power
HP
F.L.Amps
Full Load Amps
Hz
Frequency
Phase
Three/Single Phase
RPM
Speed
min-1
Imp. dia
Impeller diameter
mm
Max.
▽
Max submersible depth
Ft
Flow Max. Rated Discharge
GPM
Head Max. Max. Head
Ft
FM version nameplate
Legend
1003-00
Type
Pump type
Nr./SN
Item No./Serial No.
xx/xxxx Production date (Week/Year)
UN
Rated Voltage
V
IN
Rated Current
A
Frequency
Hz
P1N
Rated Input Power
kW
P2N
Rated Output Power
kW
n
Speed
min-1
Qmax
Max. Flow
m3/h
Hmax
Max. Head
m
Ø Imp.
Impeller diameter
mm
DN
Discharge diameter
mm
SS
Water pressure tight
IP 68
Protection type
Standard version nameplate
2
Safety
The general and specific Health and Safety requirements are described in detail in the
Safety Instructions for
ABS Products
booklet. If anything is not clear or you have any questions as to safety make certain to contact
the manufacturer ABS.
3
Transport
m
During transport the unit should not be dropped or thrown.
c
The unit should never be raised or lowered by the power cable.
The unit is fitted with a lifting device to which a chain and shackle may be attached for transport purposes.
m
Any hoist used must be adequately dimensioned for the weight of the unit.
All relevant safety regulations as well as general good technical practice must be complied with.