E-OCD II Debugger User’s Manual
Debugger Software (for Microsoft Windows)
37
3.3.16
Break/Configure : Break BEFORE/AFTER exec
Select this to toggle between the following two modes regarding the timing of break event detection.
3)
Break BEFORE exec.
: When the OCD logic detects a break event, the target device is stopped before the
OPCODE of the program counter break is executed.
Figure 3-24 Timing Diagram
4)
Break AFTER exec.
: When the OCD logic detects a break event, the target device is stopped after the OPCODE
of the program counter break is executed.
3.3.17
Break/Configure : Emulation Time Measuring
This menu item is enabled only for OCD II devices with RTIME pin connection. It shows and allows to
change the emulation time measuring option.
1)
Accumulate emulation time
: It does not clear the last emulation time and execution clock information when emulation
begins.
OCD devices do not support this function.
2)
Not accumulate
: It clears the last emulation time and execution clock information whenever emulation begins.
