E-OCD II Debugger User’s Manual
Debugger Software (for Microsoft Windows)
45
2)
Chip Trimming
: This function is not for end users. It is designed to change device configurations, including
user configuration and trimming values. A password is required to access this function.
Figure 3-38 nor for End Users
3)
Calc checksum
:
It reads the target device’s code memory and displays the checksum. If you attempt to read
a protected device, the operation might not be performed correctly.
Figure 3-39 Calc Checksum
4)
Check OSC frequency
:
This menu item is enabled only for OCD II devices. It shows the target device’s oscillation
frequency.
Figure 3-40 Check OSC Frequency
