Debugger Software (for Microsoft Windows)
E-OCD II Debugger User
’
s Manual
20
Support the following emulation methods :
- Real-time emulation
- Step emulation (source line level or code level)
- Emulation abortion
Save and load the most recent debugging environment automatically.
Support all OCD device series
- When connected with an OCD device, the OCD II interface functions in the same manner
as the OCD interface.
Support all OCD II device series
—
which support a maximum of 12 breaks
- Four of them are fixed as program counter breaks.
- The other eight breaks can be used either as program counter breaks or combined or
individual event breaks:
a. Signed and unsigned supported
b. Big endian and little endian supported
Support displaying run-time data monitoring. The values of a global variable are updated
automatically during emulation.
Support measuring the target device’s operating frequency
Support trimming the device’s internal OSC frequency
Support emulation time measurement
Note : The RTIME pin must be connected to measure the emulation time.
