14
Step8. Preparing the Remote
Controller
Before using the Remote Controller, please
insert the batteries first.
1.
Remove the battery
compartment cover by
pushing on its release
and lifting up.
2.
Insert the batteries,
making sure to properly
orient the positive (+)
and negative (-) ends as
specified by the battery
compartment labels.
3.
Replace the battery
compartment cover.
Step10. Power On/Off the system
Once you complete to assemble the basic
equipment with Media Server together, please
press the Power Button
on the front of the
panel to turn on the system.
When you would like to
turn off the system, please
select
“
Shut Down
”
from
the
“
Start
”
on the screen of
OS;
Or press
“
Power Button
”
of
Remote Controller to enter
“
Sleep Mode
”
.
Note:
1.
If users select S3 to shutdown the system and
the light of the machine will keep lighting about
15~20 seconds, please do not do any action until
the light is off.
2.
If users could not get clear vision when watching
TV with the included indoor antenna, please
install an outdoor antenna to get a good signal.
3.
The S/PDIF cable length should be under 2m, or
the audio system may not work normally. We
suggest using 1m cable.