Ultima OPIR-5 Detector
1
1.0 Introduction
1.1 Protection for Life
MSA’s mission is to benefit society by providing solutions through industry leading
safety products, services, and systems that save lives and protect capital
resources from the dangers of hazardous flames, gases, and vapors.
This manual provides instruction for installing and operating MSA’s Ultima OPIR-5
Detector for combustible gas detection. It should be read in full and the information
contained herein understood before attempting to place the system in service.
The safety products you have purchased should be handled carefully and installed,
calibrated, and maintained in accordance with the respective product instruction
manual. Remember these products are for your safety.
Special Warnings
The Ultima OPIR-5 Detector contains components which can be damaged by static
electricity. Special care must be taken when wiring the system to ensure that only
the connection points are touched.
WARNING:
Toxic, combustible, and flammable gases and vapors are dangerous.
Extreme caution should be used when these hazards are present.
Do not open when an explosive atmosphere is present.
Potential electrostatic charging hazard. Use only a damp cloth for
cleaning.
CAUTION:
Read and understand this instruction manual before operating or
servicing the equipment.
Seal all conduits within 18 inches of enclosure.
Use wire suitable for 16°C above ambient for the Receiver and 32°C
above ambient for the Source.
Figure 1: Ultima OPIR-5 Detector
