4
Operation Instructions
Power-on:
Connect the line, and turn on the power switch of the equipment after checking. The equipment is
initialization for 15 seconds. Within such 15 seconds, the display screen is not turned on. After completing the
initialization, the screen is alight and displays
“
”
, and then it enters the operating mode.
1.
Description of status display
Before the equipment is playing, the display is as shown in the interface of figure (1). Turn the digital wheel
below such interface to select the program to be played. Then press down the
“
play
”
button to play, and press
down the
“
play
”
button again to stop play. The play interface is as shown in figure (2).
2.
Operation options
Under above two interfaces, press the digital wheel to enter the
“
operation option
”
interface. As shown in
figure (3), the options operated under such interface include
“
play setting, program operation, recording
interface and timing editing
”
.
a)
Play setting
Turn the digital wheel to move the cursor to the option of
“
PLAY SET
”
, and press down the digital wheel
once to enter the interface shown in figure (4), under which the state of the current play interface.
The play state includes the options of
“
single, single loop, all loop
”
. Turn the digital wheel to move the
cursor to the option required, and then press the digital wheel once, and the symbol
“√”
appears in the box in
fig
（
3
）
PLAY SET
RETURN
OPTION
PROGRAM
DISK SPACE
SYSYTEM SET
fig
（
4
）
PLAY STE
RETURN
操作选项
PROGRA
State
：
free
VOL
：
02.Annis
’
s wonderland
03.Star of Baghdad
04.The daylight
05.Annis
’
s song
fig
（
1
）
fig
（
2
）
playing
：
VOL:
01.the wind of
change
02.Annis
’
s wonderland
03.Star of Baghdad
04.The daylight
05.Annis
’
s song
01.the wind of change
01.the wind of change
DISK SPACE
SYSYTEM SET
single
√
single loop
all loop
RETURN
