Introducing the BIOS
User’s Manual
4-33
4-11. Load Fail Safe Defaults
When you press
<Enter>
on this item you get a confirmation dialog box with a message similar to:
[Load Fail-Safe Settings]
Pressing
<Enter>
loads the BIOS default values for the most stable, minimal-performance system
operations, or you can press <
Esc
> to abort.
4-12. Load Original Values
When you press
<Enter>
on this item you get a confirmation dialog box with a message similar to:
[Load setup Original Values]
Pressing
<Enter>
loads the BIOS default values for the most stable, minimal-performance system
operations, or you can press <
Esc
> to abort.
4-13. Save & Exit Setup
Pressing
<Enter>
on this item asks for confirmation:
[Save Current Settings and exit]
Pressing
<Enter>
stores the selections made in the menus in CMOS - a special section of memory that
stays on after you turn your system off. The next time you boot your computer, the BIOS configures your
system according to the Setup selections stored in CMOS. After saving the values the system is restarted
again.
4-14. Exit Without Saving
Pressing
<Enter>
on this item asks for confirmation:
[Quit without saving changes]
This allows you to exit Setup without storing in CMOS any change. The previous selections remain in
effect. This exits the Setup utility and restarts your computer.
Summary of Contents for SR7-8X
