manualshive.com logo in svg

Abit SG-71, User Manual

The Abit SG-71 User Manual is a comprehensive guide designed specifically for this exceptional product. Available for free download from our website, it provides step-by-step instructions and valuable information to ensure a seamless setup and optimal usage experience.

Share
Download
background image

USB 2.0 Drivers Installation for Windows

®

 2000 

 

User’s Manual 

F-1

Appendix F.  USB 2.0 Drivers Installation for 

Windows

®

 2000 

After you’ve installed SiS chipset drivers, you will need to install the USB 2.0 drivers. Step by step 
instructions on how to do this are found in the following section. 

Note 

Details of the Windows

®

 2000 operating system will not be mentioned in this manual. If you have any 

problems with Windows

®

 2000 installation, operations, or settings, please refer to your Windows

®

 

2000 user's manual or other databases provided by Microsoft

®

 Corporation. 

Insert the SiS series CD into your CD-ROM drive, and it should execute the program automatically. If not, 
you can go to the CD location and execute the execution file at the main directory of the CD. After it has 
been executed you will see the screen below. 

 

Step 1:

 Move the cursor to “

USB 2.0 Driver

” 

and click on it. You will go to the next screen. 

 

Step 2:

 The “

USB 2.0 Driver Setup

” shows up, 

and it will go to the next screen for a while. 

 

Step 3: 

Windows has completed installing the 

driver. Choose “

Yes, I want to restart my 

computer now.

” in the check box and click 

“

Close

” restart your computer to finish the driver 

update. 

Summary of Contents for SG-71



















































































































Reviews:

No comments

Related manuals for SG-71

E-peas AEM10941 Quick Start Manual preview
AEM10941
Brand: E-peas Pages: 2
Telit Wireless Solutions GS2200M SKB Quick Start Manual preview
GS2200M SKB
Brand: Telit Wireless Solutions Pages: 5
S&T Kontron mITX-CFL-S Quick Installation Manual preview
Kontron mITX-CFL-S
Brand: S&T Pages: 8
AMPTRON M817 Series User Manual preview
M817 Series
Brand: AMPTRON Pages: 41
Quanmax MITX-DNV0 Series User Manual preview
MITX-DNV0 Series
Brand: Quanmax Pages: 84
Texas Instruments TPA3121D2 User Manual preview
TPA3121D2
Brand: Texas Instruments Pages: 9
Intel SERVER SYSTEM SR2500AL User Manual preview
SERVER SYSTEM SR2500AL
Brand: Intel Pages: 210
Supermicro Supero X7DBN User Manual preview
Supero X7DBN
Brand: Supermicro Pages: 91
Texas Instruments DS90UB953-Q1 User Manual preview
DS90UB953-Q1
Brand: Texas Instruments Pages: 54
Gigabyte GA-EP43T-USB3 User Manual preview
GA-EP43T-USB3
Brand: Gigabyte Pages: 96
M-system DiskOnChip PCI-G-EVB User Manual preview
DiskOnChip PCI-G-EVB
Brand: M-system Pages: 14
FIC FR33E Manual preview
FR33E
Brand: FIC Pages: 52
SmartOne 74.226 Quick Start Manual preview
74.226
Brand: SmartOne Pages: 2
Supermicro Supero X9DR3-LN4F+ User Manual preview
Supero X9DR3-LN4F+
Brand: Supermicro Pages: 113
AOpen AX4SPE Max II Easy Installation Manual preview
AX4SPE Max II
Brand: AOpen Pages: 8
MSI P35D3 Platinum - Motherboard - ATX User Manual preview
P35D3 Platinum - Motherboard - ATX
Brand: MSI Pages: 104
Gigabyte GA-Z77-HD4 User Manual preview
GA-Z77-HD4
Brand: Gigabyte Pages: 104
Intel D102GGC2 Quick Reference preview
D102GGC2
Brand: Intel Pages: 1

Brands by name

Popular brands

Load more brands