Abit SG-71, User Manual

Page: 89 / 114

SiS VGA Drivers Installation for Windows
®
2000
User’s Manual
C-1
Appendix C. SiS VGA Drivers Installation for
Windows
®
2000
After you’ve installed Windows
®
2000 and SiS chipset drivers, you will need to install the SiS VGA
drivers. Step by step instructions on how to do this are found in the following section.
Note
Details of the Windows
®
2000 operating system will not be mentioned in this manual. If you have any
problems with Windows
®
2000 installation, operations, or settings, please refer to your Windows
®
2000 user's manual or other databases provided by Microsoft
®
Corporation.
The following description will tell you how to install the Winbond hardware monitor system and use it.
Insert the SiS series CD into your CD-ROM drive. It should execute the program automatically. If not,
you can go to the CD location and execute the execution file from the main directory of this CD. After it
is executed, you will see the screen below.
Step 1: Click “ SiS VGA Driver ” button.
Step 2: The SiS driver setup InstallShield
®
wizard shows up, and it will go to the next screen
for a while.
Step 3:
The welcome screen and its dialogue box
will appear. Click the “ Next> ” button to go on.
Step 4:
The “
Setup Type
” dialogue box will
appear. Choose “ Typical ” and click “ Next> ”
button to go on.