![Abit SG-71 User Manual Download Page 79](http://html.mh-extra.com/html/abit/sg-71/sg-71_user-manual_452008079.webp)
Introducing the BIOS
User’s Manual
4-29
4-9. Load Fail-Safe Defaults
When you press
<Enter>
on this item you get a confirmation dialog box with a message similar to:
Load Fail-Safe Defaults (Y/N)? N
Pressing “
Y
” loads the BIOS default values for the most stable, minimal-performance system operations.
4-10. Load Optimized Defaults
When you press
<Enter>
on this item you get a confirmation dialog box with a message similar to:
Load Optimized Defaults (Y/N)? N
Pressing “
Y
” loads the default values that are factory settings for optimal performance system operations.
4-11. Set Password
Set Password:
Can enter but do not have the right to change the options of the setup menus. When you
select this function, the following message will appear at the center of the screen to
assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press
<Enter>
. The password typed now will
clear any previously entered password from CMOS memory. You will be asked to confirm the password.
Type the password again and press
<Enter>
. You may also press
<Esc>
to abort the selection and not
enter a password.
To disable a password, just press
<Enter>
when you are prompted to enter the password. A message will
confirm the password will be disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to enter Setup.
This prevents an unauthorized person from changing any part of your system configuration. Additionally,
when a password is enabled, you can also require the BIOS to request a password every time your system
is rebooted. This would prevent unauthorized use of your computer. You determine when the password is
required within the BIOS Features Setup Menu and its Security option. If the Security option is set to
System
, the password will be required both at boot and at entry to Setup. If set to
Setup
, prompting only
occurs when trying to enter Setup.
Summary of Contents for SG-71
