Abit KW7, User Manual

Page: 49 / 72

BIOS Setup 3-25
Allocate IRQ To USB:
This item assigns an IRQ for the USB device connected.
[Enabled]:
Automatically assign an IRQ for the USB device connected.
[Disabled]: The IRQ that was previously occupied by the USB device connected will be available for
new device.
PIRQ_0 Use IRQ No. ~ PIRQ_7 Use IRQ No.:
This item specifies the IRQ number manually or automatically for the devices installed on PCI slots.
3-8. PC Health Status
Phoenix – AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
CPU Shutdown Temperature [Disbaled] Item Help
CPU Warning Temperature [Disbaled]
Current System Temp. 0
O
C/ 32
O
F
Current CPU1 Temperature 31
O
C/ 87
O
F
PWM Temperature 39
O
C/102
O
F
CPU FAN Speed 3096 RPM
AUX FAN Speed 0 RPM
SYS FAN Speed O RPM
CPU Core Voltage 1.69 V
DDR Voltage 2.67 V
ATX +3.3V 3.34 V
ATX +5V 5.08 V
ATX +12V 11.97 V
AGP VDDQ Voltage 1.61 V
DDR VTT Voltage 1.34 V
Battery Voltage (+3V) 3.24 V
Standby Voltage (+5V) 5.06 V
↑↓
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CPU Shutdown Temperature:
This item sets the temperature that would shutdown the system automatically in order to prevent system
overheats.
CPU Warning Temperature:
This item selects the CPU’s warning temperature limit. Once the system has detected that the CPU’s
temperature exceeded the limit, warning beeps will sound.
NOTE: The onboard hardware monitor function is capable of detecting these system health conditions. If
you want a warning message to pop-up or a warning alarm to sound when an abnormal condition occurs,
you must install the “Hardware Doctor” utility. This utility is included in the “Driver & Utility CD” that
came packed with this motherboard.
User’s Manual