BIOS Setup
3-21
3-6. Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type
[S1(POS)]
Item Help
MODEM Use IRQ
[NA]
Power Button Function
[Instant-Off]
Run VGABIOS if S3 Resume
[Auto]
► IRQ/Event Activity Detect
[Press Enter]
↑↓
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(POS)]:
Enables the Power On Suspend function.
[S3(STR)]:
Enables the Suspend to RAM function.
MODEM Use IRQ:
You can specify the IRQ for modem use. Eight options are available: NA
3
4
5
7
9
10
11. The default setting is
NA
.
Power Button Function:
This item selects the method of powering off your system:
[Delay 4 Sec.]:
Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
[Instant-Off]:
Pressing and then releasing the power button at once will immediately power off the
system.
Run VGABIOS if S3 Resume:
Three options are available: Auto
Yes
No. The default setting is
Auto
. This item can let you choose
when S3 resume active, the VGA BIOS need to be initiative or not.
User’s Manual
Summary of Contents for KW7
