BIOS Setup
3-13
AGP & P2P Bridge Control:
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
AGP & P2P Bridge Control
CPU to AGP Post Write
[Enabled]
Item Help
AGP Aperture Size
[128M]
AGP 2.0 Mode
[4X]
AGP Driving Control
[Auto]
X AGP Driving Value
DA
AGP Fast Write
[Disabled]
AGP Master 1 WS Write
[Disabled]
AGP Master 1 WS Read
[Disabled]
X AGP 3.0 Calibration cycle
[Disabled]
↑↓
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CPU to AGP Post Write:
Leave this item to its default setting.
AGP Aperture Size:
This option specifies the amount of system memory that can be used by the AGP device. The aperture is a
portion of the PCI memory address range dedicated for graphics memory address space.
AGP 2.0 Mode:
This item selects the data transfer rate of AGP device. A higher rate delivers faster and better graphics to
your system. Make sure your graphics card supports the mode you select.
AGP Driving Control:
Leave this item to its default setting.
AGP Driving Value:
Leave this item to its default setting.
AGP Fast Write:
Two options are available: Disabled
Enabled. The default setting is
Disabled
. If your AGP adapter can
support this function, then you can choose
Enabled
. Otherwise, choose
Disabled
.
User’s Manual
Summary of Contents for KW7
