background image

FlashMenu (BIOS Update Utility) 

I-1 

Appendix I.  FlashMenu (BIOS Update Utility) 

ABIT FlashMenu is the most stable Windows-based BIOS flash available. No more worries from 
crashing. With one click of BIOS updating, ABIT users can flash their BIOS more easily and in less time. 

 

The installation procedures and screen shots in 
this section are based on Windows XP operating 
system. For those of other OS, please follow its 
on-screen instruction. 

Insert the Driver & Utility CD into CD-ROM 
drive, it should execute the installation program 
automatically. If not, double-click the execution 
file at the main directory of this CD to enter the 
installation menu. 

After entering the installation menu, move your 
curser to [ABIT Utility] tab. Click [FlashMenu]. 
The following screen appears. 

 

1. 

Click [Next]. 

 

2. 

Click [Next]. 

 

Click [Next]. 

3. 

 

Click [Finish] to complete setup. 

4. 

 

5. 

Execute the FlashMenu by entering the 

Windows Menu [Start] 

 [Programs] 

 

[ABIT] 

 [FlashMenu]. 

User’s Manual 

Summary of Contents for IS7















































































































Reviews: