Abilica WinRacer, Manual

Page: 28 / 48

28
OPERATING THE COMPUTER
Display function:
ITEM DESCRIPTION
SCAN
. Press "SET" to activate or turn off SCAN mode
. Automatically scan through each mode in sequence every 6 seconds.
SPEED
A . Range 0.0 ~ 99.9
. Without any signal being transmitted into the monitor for 4
seconds during workout, SPEED will display “0.0”
RPM
D . Range 0 ~ 999
. Without any signal being transmitted into the monitor for 4
seconds during
workout, RPM will display “0”
TIME
B . Without setting the target value, time will count up.
. When setting the target value, time will count down from your
target time to 0 and alarm will sound or flash.
. Without any signal being transmitted into the monitor for 4
seconds during workout, time will STOP
. Range 0:00 ~ 99:00
DISTANCE
C . Without setting the target value, distance will count up.
. When setting the target value, distance will count down from your target
distance to 0 with an alarm sound or flash.
. Range 0.00~99
CALORIES
D . Without setting the target value, calorie will count up.
. When setting the target value, calories will count down from your target
calorie to 0 with an alarm sound or flash.
. Range 0~999
PULSE
E . Current pulse will display after 6 seconds when detected by the
console.
. Without any pulse signal for 6 s
econds, console will display “0”.
. Range 40~220 BPM