EN - 3
PP Plus 36D/401D
1 Designated Use
1 Designated Use
The PP Plus hand-held welding torches are used for welding of standard wire
electrodes. They conform to EN 60 974-7 and are not considered devices
having their own functions. Arc welding can only be carried out in connection
with a welding power supply. These operating instructions only describe PP Plus
welding torches. PP Plus welding torches may only be operated using original
ABICOR BINZEL
spare parts.
2 Technical Data
*For pulse arc welding, the load data are reduced by up to 35%.
Ambient temperature of welding
- 10 °C to + 40 °C
Transport and storage
- 25 °C to + 55 °C
Relative humidity
up to 90 % at 20 °C
Control device rating
1 A AC / 250 V AC
Tab. 1
General Data
Type of voltage
DC direct voltage
Polarity of the electrode
Usually positive
Wire types
commercially available round wires
Type of use
manual
Voltage rating
113 V peak value
Protection type of the machine-side connections
IP2X , IP3X (EN 60 529)
Shielding gas (DIN EN ISO 14175)
CO
2
and mixed gas M21
Tab. 2
General torch data according to EN 60 974-7
Type
Type of
cooling
Load*
Duty
cycle
Wire ø
Gas flow rate Cooling data
Flow
temp.
Flow
Flow pressure
CO
2
M21
max.
min.
min.
max.
PP Plus
A
A
%
mm
l/min
°C
l/min
bar
bar
36D
air
300
270
60
0,8 - 1,2 10 - 20
240D
liquid
270
240
100
0,8 - 1,2 10 - 20
50
1
1,5
3,5
401D
liquid
400
350
100
0,8 - 1,6 10 - 20
50
1
1,5
3,5
Tab. 3
Product-specific torch data as laid out in EN 60974-7 PP Plus
