EN - 10
4 Putting into operation
PP
The control lead is open on the machine side. The customer has to provide the
connection of a suitable plug. If all data are provided, the machine can also
be delivered ready-to-connect. Otherwise choose a compatible plug for your
power supply and solder it to the corresponding leads according to the
connection diagram.
4.3.1 Control board connection (optional)
Operating voltage 36 - 42 V AC
The control board guarantees a synchronous run between the push motor in the
feed case and the pull motor in the manual torch. The green/white two-wire
motor line must be connected in accordance with the following connection
diagram:
Green to plus, white to minus:
1
Feed unit
2
Control board
3
Torch trigger control lead
4
Push motor line
5
Feed motor control
Fig. 5
Connection diagram
1/2 3/4/5
36 - 42 V A
C
1
2
5
4
3
1 = Motor (+)
Green (GN)
2 = Motor (-)
White (WH)
3 = Pot. min.
White (WH)
4 = Pot. max.
Brown (BN)
5 = Pot. max.
Green (GN)
Tab. 6
Colour coding
