Abicor Binzel MF1-Laser Front/Rear, Operating Instruction, Page: 45 / 100

MF1-Laser Front/Rear 6 Commissioning
EN - 21
6.5 Control lead pin assignment
1 Inching forward 2 Gas test 3 Trigger with no function
Fig. 18 Trigger
Trigger Function
Inching forward (1) (press once) Wire is fed forward (with an increasing speed from
0 to 10 m/min)
Inching forward (1) (press twice) Wire is fed backward
Gas test (2) Opens the gas valve
Trigger (3) No function
Tab. 13 Trigger assignment
1 2 3
Assignment Color Wire cross-section
16-pole control lead
Motor + BN 0.5 mm
2
Motor - WH 0.5 mm
2
Trigger for inching forward WH 0.25 mm
2
Trigger for inching backward n.c. 0.25 mm
2
Gas test trigger YE 0.25 mm
2
24-V LED/trigger BN 0.25 mm
2
GND LED GN
Encoder motor ChA RD 0.14 mm
2
Encoder motor ChB BU 0.14 mm
2
Encoder motor GND GY 0.14 mm
2
Encoder motor Vcc PK 0.14 mm
2
Wire actual value encoder ChA RDBU 0.14 mm
2
Wire actual value encoder ChB GYPK 0.14 mm
2
Wire actual value encoder GND BNGN 0.14 mm
2
Wire actual value encoder Vcc WHGN 0.14 mm
2
Tab. 14 Control lead assignment