EN - 20
6 Commissioning
MF1-Laser Front/Rear
6.4 Feeding in the wire
1
Open the housing cover.
Fig. 9 Opening the housing cover on page EN-14
2
Swivel out the rocker arm.
Fig. 10 Swivel open the rocker arm on page EN-15
3
Thread the wire into the feeder side, manually or with the assistance of the rear wire feeder.
Ensure that the wire is fed correctly through the wire guides
on the MF1-Laser.
4
Swivel in the rocker arm.
CAUTION
Risk of injury
Physical injury caused by the start of the wire.
• Keep the process-side drive away from the body.
1
Wire guide
2
Wire
Fig. 17
Feeding in the wire
1
2