iROB
®
501, iROB
®
401, iROB
®
301
13 IFR-800 fieldbus connection tool
EN
-
75
111
End crater current
20–550
100
Sets the current in the end crater condition.
The unit for this setting is [1 A]. This setting is
valid only when the special end crater filling
sequence function (F45) is ON and the wire
feed speed setting from offset 8/bit 1 is "0".
112
End crater feed speed
4–180
12
Sets the wire feed speed in the end crater
condition. The unit for this setting
is [0.1 m/min.]. This setting is valid only when
the special end crater filling sequence function
(F45) is ON and the wire feed speed setting
from offset 8/bit 1 is "1".
113
End crater voltage
100–500
215
Sets the voltage in the end crater condition.
The unit for this setting is [0.1 V]. This setting is
valid only when the special end crater filling
sequence function (F45) is ON and the voltage
setting for synergetic mode from offset 8/bit 0
is "0".
114
Fine adjustment of end crater
voltage for synergetic mode
−100–100
0
Performs fine adjustment of the end crater
voltage for synergetic mode. This setting is valid
only when the special end crater filling
sequence function (F45) is ON and the voltage
setting for synergetic mode from offset 8/bit 0
is "1".
121
Determine device number
–
–
Software information about the device can be
determined using input data. The setting value
of the output data is disabled.
The serial number of the device and the
software number are indicated by numeric
characters (without letters).
Example 1: "30125" is defined for "P30125".
Example 2: "7360" is defined for "K7360".
122
Determine software number
–
–
123
Determine major version
–
–
124
Determine minor version 1
–
–
125
Determine minor version 2
–
–
126
Determine upgrade version
–
–
Tab. 39
Function numbers
No.
Function name
Adjustable
range
Specified
value
Description
