
EN - 8
3 Safety instructions
Air-blast and injection unit
3 Safety instructions
Please observe the attached safety instructions.
3.1 Classification
The warning signs used in the operating instructions are divided into four
different levels and are shown prior to specific work steps. Arranged in
descending order of importance, they have the following meaning:
Flow rate
3-30 mm³/stroke
Repository volume
0.25 l
Working pressure
6-10 bar
Compressed-air connection
G 1/2“
Nominal flow at 6 bar and 1 bar pressure loss
1200 l/min
Operating voltage 2/2 directional valve
24 V DC
42 V AC
110 V AC
230 V AC
Tab. 2
Technical Data
DANGER
Describes imminent threatening danger. If not avoided, this will result in fatal
or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in
serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in
slight or minor injuries.
NOTICE
Describes the risk of impairing work results or potential material damage to
the equipment.
Summary of Contents for Air-blast and injection unit
