Abicor Binzel ABIPLAS 71 HF, Operating Instructions Manual

Page: 45 / 124

BAL.0716.0 • 2022-01-11
EN - 15
ABIPLAS
®
CUT HF 7 Operation
3 Attach the swirl ring.
4 Attach the selected plasma nozzle.
• The type of plasma nozzle used is primarily determined by the thickness of the material to
be cut and the current intensity.
 Tab. 3 Product-specific torch data (EN 60974-7) on page EN - 6
• The following standard values apply:
NOTICE
• Over-tightening can damage the thread.
NOTICE
• Ensure that it is positioned correctly.
• The air holes should always point towards the electrode tip.
Type Plasma
nozzle ø
[mm] Current intensity
[A]
ABIPLAS
®
CUT 71 HF/71 HF MT
Standard 0.9 30
Standard 1.1 30–60
Standard 1.2 50–70
Long 0.9 30
Long 1.1 30–50
Cross slot 0.9 30
Cross slot 1.1 30–60
Long cross slot 0.9 30
ABIPLAS
®
CUT 111 HF/111 HF MT
Standard 1.0 30–50
Standard 1.2 40–70
Standard 1.4 70–90
Standard 1.6 90–110
Long 1.2 50
Long cross slot 1.2 50
Gouging 2.6
Tab. 8
Standard values