EN - 20
BAL.0415.0 • 2018-10-22
6 Putting into operation
TIG cold-wire feeder
6.6 Connecting the shielding gas
Fig. 20 Overview of connections and control elements on page EN-24
1
Connect the shielding gas hose to the gas connector
2
Connect the shielding gas hose to the shielding gas cylinder.
6.7 Connecting the torch cable assembly
1
Connect the coolant supply
and coolant return
to the ABIDRIVE
.
2
Insert the control lead connector
into the ABIDRIVE connection bush
and secure it by turning the nut clockwise.
3
Insert the central connector
into the ABIDRIVE connection bush
NOTICE
• The valve of the shielding gas cylinder must be closed when the gas hose is installed.
• To ensure a tight connection between the shielding gas hose and the connector, the nut must be tightened completely
using a spanner.
NOTICE
• Only use intermediate cable assemblies and torch cable assemblies designed for the ABIDRIVE V2.
• Applies to liquid-cooled welding torches only.
• Please also consult the operating instructions for the welding components, such as welding torch and power source.
• Ensure that the coolant supply and return hoses have been correctly installed.
Coolant supply = blue, coolant return = red.
• Do not use deionised or demineralised water as coolant or for leak and flow tests. This may shorten your welding
torch’s service life.
• Only use special welding coolant.
• We recommend using
ABICOR BINZEL
BTC coolant.
• The use of unsuitable coolants may damage the system and void the warranty.
1
ABIDRIVE V2
2
Welding torch with cable assembly
3
Central connector
4
Control lead connector
5
Cable assembly coolant supply
6
Cable assembly coolant return
Fig. 15
Connecting the coolant
1
2
4
5
6
3
