EN - 12
BAL.0415.0 • 2018-10-22
6 Putting into operation
TIG cold-wire feeder
Depending on the default settings, the knob
can be used to increase or decrease the values.
6.3.1 Selecting the function type
Press the selection button
to switch between the function types 2-cycle, 4-cycle and 2/4-cycle with interval.
6.3.2 Selecting the parameters
Press the selection button (6) to select the individual functions.
The functions are shown by the display indicators.
Fig. 5 Front panel display on page EN-11
1
Function type: 2-cycle
2
Function type: 4-cycle
3
Function type: with interval (2 or 4-cycle)
4
Function type selection button
Fig. 6
Function type selection
1
2
3
4
1
Wire feed rate (SPE)
2
Wire feed delay time (dt)
3
Wire retraction time (rE)
4
Wire feed with interval (ton)
5
Wire feed interval break (tot)
6
Parameter selection button
Fig. 7
Parameter selection
1
2
3
4
5
6
