background image

Call Toll Free: 

877-788-7253

Email: 

[email protected]

3

LIMITED WARRANTY

Chain Harrows, Cultipackers, & Broadcast Spreaders

24 Month Consumer, 3 Month Commercial, & 3 Month Rental

General Information

TERMS & CONDITIONS

“ABI” means ABI Attachments, Inc. 520 S Byrkit Ave, Mishawaka, Indiana 46544, 877.788.7253. The above referenced models are 
warrantied for 24 months, from the original invoice date, against defects in materials and/or workmanship when put to normal 
and designed residential, farm, & ranch consumer use; 3 months for commercial use and 3 months for rental use. Options are 
warranted for 12 months (3 Month Commercial & 3 months rental). This limited warranty is only valid on new equipment to the 
original purchaser with proof of purchase. Non-transferable.

For the purpose of the warranties, “normal & designed use” refers to such uses shown in ABI marketing materials, websites, 
& videos specific to this product and does not include misuse, abuse, accidents, or damage due to inadequate maintenance, 
storage, or exposure to corrosive materials including airborne salt. However, a final judgment of “normal & designed use” is the 
sole opinion of ABI.

The warranty holder is responsible for performing reasonable and proper maintenance. The warranty holder is further responsible 
for purchasing and performing replacement of normally wearing parts at own expense.

ABI’s obligation and or liability, under this warranty, of any product defect or claim for injury or damages is limited to repair or 
replacement of the product, or payment of the reasonable cost of repair or replacement of the product, at ABI’s sole discretion 
and direction. During the warranty period, warranty replacement parts or replacement product will ship by a standard method 
at no charge to the warranty holder, in the United States & Canada only. Expedited shipping costs or international shipping costs 
(Outside of US or Canada) of warranty parts or replacement product is the responsibility of the warranty holder.

To secure warranty service, the warranty holder must, (1) report the defect immediately to ABI customer service, in writing, 
for warranty consideration within the applicable warranty term and discontinue use of the product; (2) present photographic 
evidence of the warranty claim and valid proof of purchase; (3) return the product or part to ABI or independent service technician 
within 30 days of defect discovery or failure, for return, inspection, or repair; if required. If ABI is unable to repair the product to 
conform to the warranty in a reasonable number of attempts, ABI will provide, at its option, one of the following: (a) a replacement 
for the product or, (b) a full refund of the purchase price. Repair, replacement, or refunds are the warranty holder’s EXCLUSIVE 
remedies against ABI under this limited warranty.

ABI IS NOT RESPONSIBLE FOR THE FOLLOWING: (1) Equipment purchased used; (2) Any equipment that has been altered or 
modified in ways not approved by ABI, including, but not limited to, unauthorized repair, and acts of God; (3) Depreciation 
or damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow operating instructions/
recommendations; misuse, lack of proper protection during storage or use, vandalism, the elements, collision or accident; (4) 
Normal maintenance/wear parts and/or service, including but not limited to, tips, shanks, teeth, scarifiers, top-links, finish 
rakes, pins, bolts, leveling blades, profile blades, tires, rims, and bearings. Periodic replacement of normally wearing parts is the 
responsibility of the warranty holder.

To the extent permitted by law, the limited warranty stated above is the exclusive warranty given by ABI to the original purchaser, 
and ABI disclaims any other warranties. There are no other warranties, either express or implied, including any warranty of 
merchantability, fitness for a particular purpose, or arising from course of dealing or trade usage. ABI shall not be liable in any 
event for incidental or consequential or other special damages under any theory of strict liability or negligence, or expenses 
of any kind, including, but not limited to, personal injury, damage to property, cost of equipment rentals, loss of profit, loss of 
time, loss of wages, or cost of hiring services to perform tasks normally performed by this product. ABI reserves the right to make 
improvements in design or changes in specifications at any time without incurring any obligation to owners of units previously 
sold.

Some jurisdictions do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or 
consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal 
rights, and you may also have other rights, which vary from jurisdiction to jurisdiction.

Publish Date: 3/1/2021

Summary of Contents for ABI-BS-GD-339





















Reviews: