Call Toll Free:
877-788-7253
Email:
19
Troubleshooting
WARNING: Be sure tractor engine is off, parking brake is
locked, and key is removed before making any adjustments.
PROBLEM
POSSIBLE CAUSE
SOLUTION
NON UNIFORM SPREAD
PATTERN
OPENING LEVER NOT
POSITIONED CORRECTLY
SET LEVER AT GATE OPENING TO THE PROPER
POSITION (SEE "SPREAD ADJUSTMENT" - PG 14)
SPREADER DISC DOES NOT
TURN
DRIVE WHEEL BOLT MISSING OR
SHEARED.
SPREADER DISC COTTER PIN
MISSING OR SHEARED.
BROKEN RING OR PINION GEAR.
REPLACE BOLT.
REPLACE COTTER PIN.
REPLACE RING OR PINION GEAR.
NARROW SPREAD WIDTH
SLOW GROUND SPEED.
HOPPER TOO FAR BACKWARDS.
INCREASE GROUND SPEED.
POSITION SPREADER SO IT RUNS LEVEL OR INCLINED
SLIGHTLY FORWARD TOWARD THE TOWING VEHICLE.
Replacement Parts
All of the Classic Spreader components are considered wear
parts and will need to be replaced as they wear out from
use. To reorder, please contact the ABI Support department
at 877-788-7253.
Recommended replacement parts to be kept on hand to prevent delaying work.
DESCRIPTION
QTY
SPREADER DISC
(P/N 46, PG 17)
1
THREADED BUSHING
(P/N 7, PG 17)
1
NYLON BUSHING Ø21
(P/N 23, PG 17)
2
