Abexo EGO, User Manual

Page: 21 / 28

EGO User manual
21
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER
GROUP DITEC
1) Enter set up
Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then rele-
ase (pic. A).
2) Select channel
Press the key on which you want to store the new code 6 times. The led blinks 3 times for confirma-
tion (pic. B).
3) Procedure of storage in the receiver
Press and release the PRG button on the radio receiver: a “SIG” LED turns on (see illustration C). Press
and hold the transmitter’s EGO button on which the code was previousy generated (see illustration D).
The “SIG” LED slowly flashes and then quickly for 10 seconds, then it turns off.
The EGO transmitter is stored on the receiver.
2
3
Slow
blinking
3 sec
pic. A
>>>
Fast
blinking
6 times
pic. B
FLASH
x
3
EGO32
PRODUCER MODEL
DITEC GOL4, BXLG4, BXLP2, BXLS2
Compatibility table
ROLLING CODE GROUP DITEC
pic. D
pic. C
BIXLR22 BIXLR12
PRG
SIG
>>>