manualshive.com logo in svg

Abexo EGO, User Manual

Share
Download
Abexo EGO User Manual Download Page 14

14

EGO User manual

3) Program EGO

Press and hold key 1 and 2 for about 2/3 seconds and release: led on original transmitter will blink. 

Transmit seed code keeping the original transmitter about 5cm far from EGO (pic. E) pressing the key 

(channel) you intend to store into EGO. When the code is detected EGO red led goes off and green 

led will start to blink, at this point you can release the key. (pic. F).

If you want to add another code on a different channel please goes back to step 2 within 3 seconds 

(until the.green led blinks rapidly).

At this point EGO is an emulator of the original transmitter and must be added into the receiver.

4) Add EGO to the receiver

Get closer to the receiver and:

a) Press and hold key2, then press and hold key 4 (pic. G) until the red led lights steady, then release 

both (pic. H). 

b) Press the key (channel) you want to add into the receiver (key 1 for channel 1, pic. I).

Green led will start to blink indicating the initiation of the communication with the receiver, which 

can last 25-30 seconds (Pic. J). 

c) Wait for the receiver feedback (opening gate, lights, …) indicating that EGO has been recognised.

Important

: the receiver may has been set up not to accept new transmitters. In this case for the 

correct procedure please refer to receiver manufacturer instructions.

pic. F

3 sec

>>>

>>>

>>>

FLASH

   

x

3

pic. E

original

CLICK

5cm

pic. G

pic. H

2

4

1

pic. I

pic. J

FLASH

      FLASH

   FLASH

Summary of Contents for EGO





























Reviews:

No comments

Brands by name

Popular brands

Load more brands