Abestorm SLGR Elite, User Manual

Page: 4 / 11

-1-
BUMPER TO BUMPER WARRANTY
BENEFITS OF CADPXS WARRANTY
WARRANTY REGISTRATION
By choosing CADPXS, you will be sure that you have a commercial-
grade dehumidifier that will perform the job it is designed for.
These are state of the art dehumidifiers that are backed with a
bumper to bumper warranty.
A CADPXS bumper-to-bumper warranty covers the entire product
and accessories,
electrical parts and components, safety
equipment and instruments.
It does not cover parts of the product that wear and tear with time.
It does not cover routine maintenance tasks. Parts damaged by
you, an accident, or improper maintenance are also not covered.
Coverage from dealerships can be more costly due to the fact that
it may be rolled into your product payment plan and accrue
interest. Third-party extended warranty costs will vary depending
on the make and model of your product, your product usage
history, and other factors.
If you want to avoid unexpected expensive repairs, a bumper-to-
bumper warranty can protect you financially and provide you with
peace of mind that you’ll be taken care of. product service
contracts also usually include added benefits such as technical
assistance, repairs, and in some cases installation assistance.
CADPXS believes in the quality of its products. This is why it stands
behind its products and gives a more extended warranty than what
you can get elsewhere.
To CADPXS, a longer warranty is an
important aspect of our service. This is the reason why the
company fully supports its bumper to bumper warranty.
The warranty is valid if claimed by an original buyer and if bought
from CADPXS, authorized reseller or dealer. The company covers
the cost of the components, the cost of labor required to repair the
unit. However,
the cost of dissembling, transportation, and
installing the product will be paid by the client.
-10-
-2-
WIRING DIAGRAM
FLOAT SWITCH (LOW)
TRANSFORMER
FUSE
NO
COM
33k
N
N
F
AN -L
N
VALUE
DRAIN
FLOA
T
- H
POWER
BOARD
RH-OUT
RH-IN
THERMISTOR
PROBE EVAP
RH-IN
RH-OUT
TEMP/RH
SENSOR
FLOA
T
- L
CONTROL
BOARD
L
N
GRN
PUMP
(24v)
S
R
C
GRN
COMP
COMPRESSOR
CAPACITOR
BLOWER
BLOWER
CAPACITOR
WHT
GRN
BLK
BLK
WHT
RED
RED
BRN
BLU BRN
BLU
TEMP/RH
SENSOR
+
-
SWITCHING
POWER
SUPPLY(DC)
V+ V- L N
-9-
Power cord Installation
Connect the plug of the connector of the power to the power outlet
of the appliance.
Drain Hose Installation
1.Attach the hose inlet to the drain outlet located on the graph appliance.
2.Allow the hose to be set off to a drain or a sink or even to a container
that can collect the discharged water.
Control Panel
Filter Maintenance
1. Unplug the unit.
2. Slide-out the filter from the side.
3. Check the filter for dirt and
buildup.
4. Clean the filter mesh by
vacuuming it or washing with warm
water (no soap or cleaners). Gently
shake the filter dry then reinsert it.
There is dirt or buildup, replace the
filter.
MAINTENANCE
Wi-Fi connection successful.
Hotspot direct successful icon.
Connection to server failed
.
-8-
Unit Maintenance
• Always clean the surface of the housing with a damp cloth. Do not
clean with water directly.
• Always store the machine in a day and cool indoor place, away
from sunlight as well as chemicals and out of children’s reach.
When the unit is plugged in you will
see the Abestorm LOGO.
STARTUP
-4-
Press the POWER button to turn the dehumidifier ON and
OFF.
Press the PURGE button to purge the machine.
Press the MENU button to advance to the next screen or to
enter a value.
Press the SET button to scroll through available values.
The machine displays when it is nat working.
(Power off state but have electricity)
5
4