background image

Operating Relative Humidity Range: 

1%-40%

Amperage Usage:

 

4.41 Amps

Sound Level: 

58 dBa

Airflow :

210

 

CFM

COP: 

3.0 L/kWh

Power Supply: 

220V/60Hz

Dimensions LxWxH: 

540×295×440mm

Operating Temp. Range:

 

25-80

Refrigerant: 

R410A

Outlet Requirement:

 

15 Amp, 3 Prong, GFCI

Unit Weight: 

28kg

Operation

Transporting

Always keep the unit inside the space that you need to dry up, insert the hose into the 

drain or a large container, and switch it on. To reduce the time it takes to dry, ensure that 

all doors, windows, and other large openings are closed or sealed as the case may 

require. You should also demarcate and seal off the wet areas from the dry spaces.

Capacity: 

43L @ 26 ˚C , 60% RH

Warranty Registration

Prior to installation of the unit,write down the serial number and date of purchase. 

You will need this information if you need assistance in the future. The data label on 

the side of your unit has the necessary information.

Model Number: SLGR Elite

Serial Number:

Date of Number:

For additional questions concerning your dehumidifier, 

Contact your local installer or 

Contact Abestorm :

[email protected] or 44(20)81243974.

Electrical Supply

Power Supply: 

Outlet Requirement: 

Citcuit protector: 

WARNING:

Using a 220V outlet may cause serious injury from electric shock.

To reduce risk of injury:

                                   1. Always disconnect machine from electrical power before servicing

                                   2. Only plug unit into a gounded electrical cicuit

                                   3. Do not use an extension cord

                                   4. Do not use a plug adapter

3-Prong, GFCI

220V/50HZ

15Amp

Specifcations

The Abestorm® SLGR Elite sports a high impact resistant roto-molded casing that 

provides sufficient protection from possible damage when the unit is hit or when it falls. 

Remember to always place the unit on its base when moving it from location to location 

and when moving by vehicle or similar means. You may want to tip it upright if you want 

to make use of its handles when loading it to a trailer back.

Selecting the Location

• Place the Unit in an Upright Position.
• The location of the operation should be an enclosed area.
• The location should allow constant air circulation.
• The location should have power outlet at about 6 meters of the 
device as that is the length of the cord.
• Keep the Dehumidifier away from any moisture-laden air in the 
working area.

3

2

Summary of Contents for SLGR Elite












Reviews: