3DM 2 Reference
www.3ware.com
55
Note:
The policy
Continue on Source Error During Rebuild
is
equivalent to the “Force continue on source errors” option in 3DM
v 1.x and the “ignoreEcc” option in the CLI.
Other Controller Settings
For 9000-series controllers, the Other Controller settings displays information
about additional settings that can only be changed in the BIOS (3BM). For
more information see “Setting Policies for a Controller through 3BM” on
page 74.
This section does not appear for 7000- and 8000- series controllers.
Number of Drives Per Spin-up.
Number of drives that will spin up at the
same time when the controller is powered up. (This setting only applies when
the feature is supported by the disk drives and has been enabled in 3BM.)
Delay between Spin-ups.
The delay between drive groups that spin up at one
time on this particular controller.
Export JBOD (Unconfigured) Disks.
Indicates whether unconfigured disks
(JBODs) should be exported to the operating system. By default, this setting
is disabled. For more information about this feature, see “Exporting JBOD
Disks” on page 75.
Disable Write Cache on Unit Degrade.
Indicates whether write cache will
be automatically disabled on a unit if it becomes degraded. After the unit is
rebuilt, the write cache will be re-enabled automatically.
