ABC-Products Pele, Instruction Manual

Page: 30 / 40

8
Mounting Onto A Crane
The primary axis of the PELE Remotehead has a cross section di-
mension of 80 mm. That conforms precisely to the diameter of the
Euro-adaptor.
The provided crane mount adaptor is a clamping plate each with
two openings of 80 mm diameter. It allows you to easily and quickly
mount the PELE Remotehead warp resistant to any ABC crane.
The PELE Remotehead can be mounted just as easily to any other
crane, as well, provided that it is equipped with a Euro-adaptor on
its tip.
Make sure that the crane mount adaptor sits tightly and safely in
place. Also, the locking pin on the primary axis helps prevent the
mount from sliding out.
Warning: If the primary axis slides out of the crane mount adaptor,
the crane will suddenly shoot up.
The crane might tip over!!!