ABC-Products Pele, Instruction Manual

Page: 31 / 40

Feed the PELE wedge plate into the camera plate. The wedge
plate possesses two screws with each 1/4 inch thread and 3/8-inch
thread.
Mount the PELE wedge plate to the holding plate of your camera.
Make sure that you mount the camera onto the PELE wedge plate
in such a fashion that the balance point of the camera is fixed so -
mewhat in the middle of the PELE wedge plate.
Example A (O.K.)
The balancing point of the camera is po-
sitioned approximately over the middle
of the wedge plate.
Example B (NOT O.K.)
Due to imbalance, the camera tips back.
(Inroad of the motor; inhibits proper and
smooth operation)
Example C (NOT O.K.)
Due to imbalance, the camera tips for-
ward. (Inroad of the motor; inhibits pro-
per and smooth operation
)
9
Mounting The Camera