86
Appendix B: Pairing the Patient
Controller to the Generator
The following instructions outline the steps for pairing
the patient controller to the generator.
1.
Place the magnet perpendicular to the generator
for 10 seconds.
2.
Tap the patient controller app.
The patient controller app launches.
3.
Tap
.
The Add Generator screen opens.
4.
Tap an available generator in the "Select a
Generator…" list.
If no generators are found, you will see the No
Generators Found message. Tap to search for
available generators again and refresh the
generator list.
5.
Enter the pin code displayed on the screen in the
Bluetooth Pairing Request dialog box.
6.
Tap Pair to pair the patient controller and
generator.
The "Connecting to Generator…" message
displays while the patient controller is connecting
to the generator.
