54
3.
Tap the MRI Mode toggle button to turn on MRI
mode.
4.
When the "Set Generator to MRI Mode" message
appears, tap Continue. Stimulation stops, and the
patient controller app checks the system for any
issues. If the checks are successful, the "Proceed
with MRI" message appears and the MRI mode is
on.
NOTE: If a warning screen appears, such as
those shown in "Troubleshooting Messages
for MRI Modes" (page 78), do not proceed
with the scan.
Disabling the MRI Mode
After your procedure, you need to disable the MRI
mode to restart stimulation. To disable the MRI mode,
follow these steps:
1.
Launch the patient controller app and connect
with your generator. You should see the following
screen, showing that the IPG is in MRI mode.
