![background image](http://html1.mh-extra.com/html/abbott/heartmate-3/heartmate-3_patient-manual_3346620032.webp)
32
| Powering the System
2. Open the battery compartment and pull the red
ribbon to remove the batteries.
STATUS SYMBOLS
ALARM MEANS
TO RESOLVE ALARM
Internal fault
1. Promptly connect to two fully charged
HeartMate 3™ LVAD 14 V lithium-ion batteries.
2. Call your hospital contact as soon as
possible for diagnosis and instructions.
Replace MPU batteries
Replace the AA batteries
in the MPU.
ADVISORY
CHANGING THE ALKALINE AA BATTERIES
1. Loosen the screw from the rear panel.
3. Place the alkaline AA batteries in the compartment.
4. Close the compartment and tighten the screw.
POWERING THE SYSTEM:
MPU ALARMS AND TROUBLESHOOTING
Summary of Contents for Heartmate 3
