background image

13

Language 

Language 

Language 

Language 

14

Language 

Language

Language

Language

Understanding Blood Glucose Test Results

Low and High Blood Glucose Results

  The meter displays results in mmol/L or mg/dL. The unit of measurement is preset. You cannot change 

  this setting.

IMPORTANT:

 

The meter displays results from 1.1–27.8 mmol/L 

(20–500 mg/dL). Low or high blood glucose results can indicate a 

potentially serious medical condition.

  General:

Result

What It Means

What To Do

Lower than 2.8 mmol/L  

(Lower than 50 mg/dL)

Low (hypoglycaemic)

Repeat the test with a new test strip, even 

if you do not feel that you have low blood 

glucose.

Higher than 16.7 mmol/L

(Higher than 300 mg/dL)

High (hyperglycaemic)

Repeat the test with a new test strip, even 

if you do not feel that you have high blood 

glucose.

  Meter:

Display

What It Means

What To Do

Appears when result is: 

Lower than 1.1 mmol/L

(Lower than 20 mg/dL))

Severe low blood 

glucose

or

There may be a problem 

with the test strip

Repeat the test with a new test strip. If 

the result is LO, contact your healthcare 

professional 

immediately

.

Appears with result 

which is:  

Higher than or equal to

16.7 mmol/L

(Higher than or equal to

300 mg/dL)

Blood glucose level is 

high

Check blood β-Ketone, if checking ketones 

is part of your diabetes management 

programme.

ART20287_Rev-A-Man.indd   13-14

11/17/10   3:01 PM

Summary of Contents for FreeStyle Optium



























Reviews: