27
Language
Language
Language
Language
28
Language
Language
Language
Language
The countdown appears on the display as the meter checks the glucose or
β-Ketone level.
Note: Do not
remove the test strip from the meter or disturb the test strip during the
countdown.
If the countdown does not start, remove and discard the used test strip, turn off
the meter and try again with a new strip.
View the Result
The meter beeps (if sound is on) when the result appears on the display. The test
is complete (examples shown). The result is stored in memory as a control solution
result or you can write it in a logbook as a control result.
Note:
appears with the result if performing a β-Ketone control solution
test.
Compare the control solution result to the range printed on the blood glucose or
blood β-Ketone test strip instructions for use. The result should fall within the range.
Causes of out-of-range results include:
•
The meter and test strips may not be working correctly
Repeat the test with a new test strip. Follow the testing instructions carefully.
Contact Customer Service if the result is still outside the printed range.
Turn Off the Meter
Use the opened foil packet to remove the used test strip. This turns off the meter.
Discard the used test strip correctly.
Note:
You can also press and hold
for at least 2 seconds to turn off the meter. The
meter also turns off after 60 seconds of inactivity.
ART20287_Rev-A-Man.indd 27-28
11/17/10 3:01 PM