Removing the Sensor
The Sensor automatically stops working and should be removed 14 days
after being started . You should also replace the Sensor if there is any
irritation or discomfort at the application site or if the Reader reports a
problem with the Sensor currently in use .
Step
Action
1
Pull up the edge of the adhesive that keeps the
Sensor attached to the skin . Slowly peel away
from the skin in one motion .
Note: Any remaining adhesive residue on the
skin can be removed with warm soapy water or
isopropyl alcohol .
2
Discard the used Sensor according to your facility’s procedures .
See
Maintenance and Disposal
section .
25